AD Systems DR10 Deposit Rater for Jet Fuel

AD Systems DR10 Deposit Rater for Jet Fuel


Untitled-112The Jet Fuel Thermal Oxidation Test (JFTOT®) ASTM D3241 is universally used by the industry to measure high temperature stability of aviation turbine fuels. The ASTM D3241 is required to be run on every batch of jet fuel produced according to ASTM D1655 or DEF STAN 91-91 specifications. In this test method, the fuel is pumped through heater tube at fixed flow rate and during a specified period of time. The fuel is pass or fail rated according to the amount of deposit formed on the heater tube at a specified temperature. Traditionally, the amount of deposit on the tube is rated visually against a reference color scale. The proper rating requires significant experience and expertise. However, operator capabilities vary, so evaluation of color can be quite subjective. Many articles have been published on the fact that color does not provide real information on the thickness and volume of deposits, parameters which are far more meaningful for characterizing jet fuels for users and suppliers. The aviation fuel industry found that one of the most crucial stages of this test method is an objective analysis of deposit produced on the heater tube.

pdf DR10 Deposit Rater



New! Innovative DR10 Instrument

A new instrumental method of quantitative measurement of tube deposits has been developed by AD Systems, in which the thickness of the deposit is accurately determined by an automatic instrument, reducing test subjectivity. The innovative DR10 instrument uses an interferometry technique for precise measurement of deposit thickness in nanometers. This stand-alone compact instrument can be easily installed in any location in minutes. The operation is based on a powerful light source, a spectrometer with fiber optic probe and specially designed application software.

The DR10 test is simple and straightforward. The heater tube is prepared according to ASTM D3241 test procedure and is then placed in the test chamber of the DR10. Using an intuitive graphical interface with touch screen panel, the operator enters sample information and starts a tube scan. Specific light is emitted and directed onto the surface of the heater tube. The reflected light is collected and the interference created by the deposit is monitored by the spectrometer. The software analyzes the interference and calculates the deposit thickness. Precise thickness measurements are taken at 1,200 points along and around the tube surface. A detailed test report is ready in less than 15 minutes.

The DR10 test report provides a 3-D profile of the deposit distribution on the tube surface. The software automaticaly detects and reports the Standard Spot value which is the mean deposit thickness of the thickest 2.5 mm2 area as defined in ASTM D3241. The average and the maximum thickness deposit values, as well as the calculated total deposit volume are reported. For complete test traceability, the DR10 report is tagged with the heater tube serial number picture taken by the built-in camera.


The DR10 is an extremely useful measurement tool for fuel research programs providing unique information on fuel deposit behavior at different oxidation temperatures and for the evaluation of anti-fouling additives efficiency. The DR10 is a versatile instrument for research and routine applications at every location where thermal oxidation of turbine fuels is evaluated:
• Refineries
• Pipelines and Terminals
• Airports
• Military
• Research and Development
• Independent Laboratories
• Aircraft Engine Manufacturers


• Absolute measurement of deposit thickness
• Quick, accurate and objective rating
• Push-button operation
• Very compact design
• Rigid construction

Note: Specifications subject to change.

Part No. Description
DCP-AA210-001 DR-10 Deposit Rater for Jet Fuel