OilLab 715 Reid Vapour Pressure

OilLab 715 Reid Vapour Pressure
Download Brochure

ASTM D323
IP 69
ISO 3007

CE marked

Subject

ASTM D323 – IP 69 – ISO 3007
Vapour Pressure of Petroleum Products (Reid Method)
The test method covers the determination of vapour pressure of gasoline, volatile crude oil, by means of three procedures: A, B and C.
The OilLab 715 grant the determination in conformity with the procedure B (horizontal bath) on petroleum products having Reid Vapour Pressures below 180 kPa (26 psi).

Main Features

  • Bath made in stainless steel suitable for the accommodation of up to two (2) vapour pressure cylinders according to ASTM specifications
  • Bath temperature range from ambient to +80°C ±0.1°, filling level 20 litres
  • Motorized stirrer with shaft , drain tap
  • Electric immersion Heather controlled by PID system
  • Drive system for swing gently the vessel in horizontal position
  • Secure handle cover for open bath
  • Bath equipped with a Touch screen panel PC
    • TFT/LCD 8”
    • 40 Gb HD
    • Resolution 1024 × 768 and 16M colours
    • 2 × USB Ports for connecting pen drive and printer
  • The dedicated software manages:
    • The bath temperatures by means of a PT100 sensor class A that can be displayed in °C / °F, including the over temperature safety alarm
    • 2 (two) electronic sensors, pressure transducers / electronic pressure gauges supplied for the coupling to the test vessels
  • Cables and connectors
  • Dedicated software for real time monitoring and recording that includes:
    • Display of the pressure in bar / psi / Kpa
    • Graph creation in real time during the test
    • Invalid test indication
    • Export of files in xls / pdf / jpg format
    • Calibration up to 100 points
  • Power supply: 220Vac 50/60Hz

Accessories

  • LAB-100-371/50: silicone oil, can of 25 litres
  • T-AS18C: thermometer ASTM 18C
  • LAB-102-013: flexible Junction for O2
  • LT/RC-179000-A/M
    Reid Cylinder – Liquid Chamber – One Opening – ASTM D323:

    • made in stainless steel
    • in one end of the liquid chamber an opening of approximately ½” shall be provided for coupling with the vapour chamber
    • the inner surface of the coupling end shall be sloped to provide complete drainage when inverted
    • the other end of the chamber shall be completely closed
  • LT/RC-179000-B/M
    Reid Cylinder – Vapour Chamber – ASTM D323:

    • made in stainless steel
    • lower coupling
    • upper ½” groove with a ¼” reducing cap for pressure gauge