Secondary Working Flash Point Standards
Cleveland Open Cup Flash Point
Paragon ISO 17025 / ISO Guide 34 certified COC Flash Point Standards are tested and certified in accordance with ASTM D92 ‘Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.’
These UKAS certified standards are specifically designed to be used for regular instrument performance checks. Packed uniquely in 3 x 80ml ‘single shot’ bottles assuring the highest level of sample integrity. An economical, time saving addition to any laboratory concerned with the generation of valid analytical test data.
Typically used in, but not limited to, the analysis of petroleum products with flash points above 79°C (175°F) and below 400°C (752°F)
| Part Number | Test Method | Product Nature | Certified Value | Package size |
| FP-COC-1 | Density ASTM D92 | Mineral Oil | 85.0°C | 3x80mL |
| FP-COC-3 | Density ASTM D92 | Mineral Oil | 149.0°C | 3x80mL |
| FP-COC-4 | Density ASTM D92 | Mineral Oil | 193.0°C | 3x80mL |
| FP-COC-5 | Density ASTM D92 | Mineral Oil | 257.0°C | 3x80mL |
| FP-COC-6 | Density ASTM D92 | Mineral Oil | 112.0°C | 3x80mL |
Pensky-Martens Flash Point
Paragon ISO 17025 / ISO Guide 34 certified PMCC Flash Point Standards are tested and certified in accordance with ASTM D93 ‘Standard Test Method for Flash Point by Pensky Martens Closed Cup Tester – Procedure A’. Procedure A is applicable to distillate fuels – diesels, bio-diesel blends, kerosene, heating oil, turbine fuels and lubricating oils.
These UKAS certified standards are specifically designed to be used for regular instrument performance checks. Packed uniquely in 3 x 80ml ‘single shot’ bottles assuring the highest level of sample integrity. An economical, time saving addition to any laboratory concerned with the generation of valid analytical test data.
Typically used in, but not limited to, the analysis of petroleum products with flash points above 40°C and below 360°C.
| Part Number | Test Method | Product Nature | Certified Value | Package size |
| FP-PMCC-1 | ASTM D93 Proc. A | Diesel | 56.5°C | 3x80mL |
| FP-PMCC-2 | ASTM D93 Proc. A | Mineral Oil | 76.5°C | 3x80mL |
| FP-PMCC-3 | ASTM D93 Proc. A | Mineral Oil | 116.0°C | 3x80mL |
| FP-PMCC-4 | ASTM D93 Proc. A | Mineral Oil | 140.0°C | 3x80mL |
| FP-PMCC-5 | ASTM D93 Proc. A | Mineral Oil | 186.5°C | 3x80mL |
| FP-PMCC-6 | ASTM D93 Proc. A | Mineral Oil | 232.0°C | 3x80mL |
| FP-PMCC-7 | ASTM D93 Proc. A | Mineral Oil | 100.5°C | 3x80mL |