Stainless Steel Vacuum Glove Box

Stainless Steel Vacuum Glove Box with Closed Loop Gas Circulation

Model Number : TMAX-VGB-6
Dimension(L*W*H) : Length: 1220mm (48.0”) Depth: 750mm (29.5”)
Compliance : CE Certified
Warranty : Two years limited warranty with lifetime technical
Payment : L/C D/A D/P T/T Western Union
Delivery Time : 15 day

Closed Loop Gas Circulation
Inert gas in a closed loop. The gas is circulated by the blower and purifier, H2O, O2 can be removed continuously.

Auto Purging
The replacement of the atmosphere inside the glove box can be achieved automatically by the purging valves.

Automatic Regeneration
H2O and O2 removal material can be regenerated. The regeneration process can be program controlled.

Automatic Pressure Control
The pressure in the glove box is controlled automatically by the Programmable Logic Controller (PLC). Working pressure can be set between +10mba and -10mba. If the pressure goes over+/- 12mbar, the system will be protected automatically.

Eco Mode
The vacuum pump will be activated automatically when necessary, and will turn off after a period of idle time. Blower frequency will be switched to 25Hz when moisture and oxygen level reaches to less than 1 ppm


Cabinet water and oxygen content under the standard condition:
Water content ≤1ppm, oxygen content≤1 ppm (Note: Standard condition is that an atmospheric pressure, constant temperature of 20 degree).
Leakage Rate: ≤0.05Vol%/ h (subject to change value of oxygen content in box)
Used Gases
a) Working Gas: N2、Ar、He and etc.
b) Controlling Gas: Compressed air or Inert Gas.
C) Restoring Gas: Mixed gas of working gas and hydrogen.
Restoring gas is as same as working gas if there is only water removal system or oxygen removal system.
Remarks: All Single side boxes of 4 gloves are assembled glove box. Numbers of assembled box can be ordered as per customer’s needs. Quantity of purification columns is also designed to be matched according to customer’s requirements